Channel Partnerssiemenslappindiaphoenixklaukegreenleeharting

klauke


Connectors

Bi-Metallic Compression Lugs (Click here for more details)

Cable End Sleeves (Click here for more details)

Copper Tubular Lugs (Click here for more details)


Bi-Metallic Compression Lugs

  • For aluminium conductors DIN 48201 and pre-rounded sector shaped conductors.
  • With barrier, with solid copper palm
  • Material: Al 99.5; E-copper
  • Surface: bright

Cable End Sleeves

  • DIN 46228, part 4, 0.5-50 mm²
  • Material: copper
  • Surface: tin plated
  • Insulated, free of halide
  • Synthetic material: Polypropylene

Electrical Connection System

Insulated solderless terminals, 0.1 - 6 mm (Ring type)

  • Hard-soldered in the crimping area
  • For fine and superfine stranded conductors
  • With Easy - Entry insulation for simple conductor insertion

Characteristics

  • Manufactured according to DIN 46237
  • Insulation sleeve:PA, free of halide
  • Heat resistant to 105C

Material: Cu-ETP
Surface: Tin Plated

Insulated solderless terminals, 0.1 - 6 mm (Fork type)

  • Hard-soldered in the crimping area
  • For direct screw- mounting
  • For fine and superfine stranded conductors

Characteristics

  • Manufactured according to DIN 46237
  • Insulation sleeve:PA, free of halide
  • Heat resistant to 105C

Material: Cu-ETP
Surface: Tin Plated

Insulated Pin terminals, 0.1 - 6 mm

  • Hard-soldered in the crimping area
  • For fine and superfine stranded conductors
  • With Easy - Entry insulation for simple conductor insertion

Characteristics

  • Manufactured according to DIN 46231
  • Insulation sleeve:PA, free of halide
  • Heat resistant to 105C

Material: Cu-ETP
Surface: Tin Plated

Insulated Pin Receptacles, 0.5 - 6 mm(Bronze)

  • For fine and superfine stranded conductors
  • High Quality bronze material provides optimum spring
    characteristic and improved contact strength

Characteristics

  • Insulating sleeve: PVC
  • Colour - Coding for cross - section assignment

Material: CuSnZn (bronze)
Surface: Tin Plated

Insulated Pin Connectors, 0.5 - 6 mm(Brass)

  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PVC
  • Colour - Coding for conductor cross - section assignment

Material: CuZn (brass)
Surface: Tin Plated

Insulated Pin Receptacles, 0.5 - 6 mm (Bronze)

  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PA, free of halide
  • Insulated
  • Colour coding for conductor cross - section assignment

Material: CuSnZn (bronze)
Surface: Tin Plated

Insulated Pin Connectors, 0.5 - 6 mm (Bronze)

  • For fine and superfine stranded conductors
  • High Quality bronze material provides optimum spring characteristic and improved contact strength

Characteristics

  • Insulating sleeve: PA, free of halide
  • Insulated
  • Colour coding for cross - section assignment

Material: CuSnZn (bronze)
Surface: Tin Plated

Insulated Receptacles, 0.5 - 6 mm (Brass)

  • For fine and superfine stranded conductors

Characteristics

  • Manufactured to DIN 46245 part 1-3 and similar versions
  • Insulating sleeve: PVC / PA, free of halide

Material: CuSnZn (brass)
Surface: Tin Plated

Insulated Receptacles, 0.5 - 6 mm (Bronze)

  • For fine and superfine stranded conductors

Characteristics

  • DIN 46245, part 1 - 3 and similar versions
  • Insulating sleeve: PVC
  • Colour coding for cross - section assignment

Material: CuSnZn (bronze)
Surface: Tin Plated

Insulated Receptacles, Multiple type 0.5 - 6 mm (Brass)

  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PVC
  • Colour coding for cross - section assignment

Material: CuZn (brass)
Surface: Tin Plated

Insulated Receptacles, 0.5 - 6 mm (Brass)

  • For fine and superfine stranded conductors

Characteristics

  • With solid dielectric insulation
  • Insulating sleeve: PVC / PA, free of halide
  • Colour coding for cross - section assignment

Material: CuZn (brass)
Surface: Tin Plated

Insulated Tabs, 0.5 - 6 mm (Brass)

  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PVC / PA, free of halide
  • Colour coding for cross - section assignment

Material: CuZn (brass)
Surface: Tin Plated

Insulated closed end-splices, 1.5 - 6 mm

  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PA, free of halide
  • Colour coding for cross - section assignment

Material: Cu - ETP
Surface: Tin Plated

Insulated Butt Connectors, 0.1 - 6 mm

  • With Buttmarks for precise cable insertion
  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PA, free of halide
  • Colour coding for cross - section assignment

Material: Cu - ETP
Surface: Tin Plated

Insulated Butt Connectors, 0.5 - 6 mm

  • With Waterproof heat shrink insulation
  • With Buttmarks for precise cable insertion
  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PE,
  • Colour coding for cross - section assignment

Material: Cu - ETP
Surface: Tin Plated

Insulated Parallel Compression Joints, 0.1 - 6 mm

  • For fine and superfine stranded conductors

Characteristics

  • Insulating sleeve: PA, free of halide
  • Colour coding for cross - section assignment

Material: Cu - ETP
Surface: Tin Plated

Copper Tubular Lugs

Tubular Compression Cable Lugs

DIN 46235
Material: Copper to EN 13600
Add Capacity: 6 to 1000mm
Surface: tin plated, copper finish on request

Tubular Cable Lugs

Standard type
Material: Copper to EN 13600
Surface: tin plated
Add Capacity: 6 to 1000mm
with or without inspection hole





Crimping Tools

Battery Powered Hydraulic Crimping Tools (Click here for more details)

Hydraulic Crimping Tools (Click here for more details)

Mechanical Crimping Tools (Click here for more details)


Battery Powered Hydraulic Tools

Kluake pro EKP 1

Ekp1
  • Battery powered basic tool, Pro-Series
  • Compatibly with all crimping heads of the Klauke Pro-Series
  • Head rotates 330 º
  • Quick motor stop
  • Automatic retraction when crimping is complete
  • Manual retraction in case of need
  • Ergonomic design for one hand operation
Crimping force: 10 kN
Stroke: 9 mm
Crimping cycle: 2 s
Weight: 1.2 kg
Battery voltage: 9.6 V
Battery capacity: 1.3 Ah, approx. 150 crimps
(Cu tubular cable lugs 10 mm², indent
crimping)
Capacity: 0.5 to 150mm²
Charging time: 40 min. (15 min. with quick charger)
Ambient temperature: -20 °C up to +40 °C
Part No. EKP1

Klauke Mini EK 35/4

Klauke EK 35/4
  • Electro hydraulic crimping tool for interchangeable dies.
  • Head rotates 360°
  • Quick Motor Stop.
  • Automatic retraction when crimp is complete.
  • Manual retract in case of need.
  • Ergonomic design for one hand operation.
Crimping force: 35 kN
Stroke: 9 mm
Crimping cycle: approx. 4 s
Weight: 1.600 kg (incl. battery)
Battery voltage: 9.6 V
Battery capacity: 1.3 Ah
Capacity: 6 to 150mm²
Crimps per charge: approx. 85 crimps (Cu tubular cable lugs
120 mm², hexagonal crimping)
Charging time: 40 min.
Ambient temperature: –20 °C up to +40 °C

Klauke Multi EK60 UNV

EK 60 UNV
  • One head for crimping, cutting and punching
  • Punching adapter for greenlee punching tools
  • Various cutting dies for aluminium and copper
    conductors with and without armouring
  • Special dies for cutting threaded rods and DIN rails
  • Adapter for crimping dies of most Klauke ranges.
  • Dies to punch DIN rails

Characteristics

  • Universal head rotates 360°, flip top style
  • Two stages hydraulics
  • Quick motor stop
  • Automatic retraction when cut is complete
  • Manual retraction in case of need
  • Electronic control and monitoring of operation
  • Light diode for battery charge and maintenance control
Cutting time: 8 s to 20 s (depending on cable cross-section)
Crimping force: 60 kN
Stroke: 42 mm
Crimping cycle: 5 s up to 8 s (depending on cable size)
Weight: 4.5 kg
Battery voltage: 12 V
Battery capacity: 3.0 Ah,NIMH approx. 195 crimps
(Cu 150 mm² DIN 46235 ),
60 punches (Pg 48 in 3.0 mm St 37),
approx. 70 cuts (4 x 70 mm² NYY)
Capacity: 6 to 300 mm²
Charging time: 60min. (15 min. with quick charger)
Ambient temperature: -20 °C up to +40 °C

Klauke EK 12042

Klauke EK 12042

Wide Crimping

  • For interchangeable dies
  • C-crimping head, rotates 360°
  • Quick motor stop
  • New two stage hydraulics
  • Motor stop and automatic retraction when crimping is complete
  • Manual retraction in case of need
  • Electronic control and monitoring of crimping operation
  • Light diode for battery charge and maintenance control
Crimping force: 130 kN
Stroke: 42 mm
Crimping cycle: 8.5 s up to 15 s
(depending on size)
Weight: 6.8 kg
Battery voltage: 12 V
Battery capacity: 2.6 Ah, approx. 65 crimps
(Cu 150 mm² DIN 46235)
Capacity: 16 to 400mm²
Charging time: 60 min. (15 min. with quick charger)
Ambient temperature: 20 °C up to +40 °C
Part No. EK12042
Mains operated tool, 230V Optional

12 Ton Dieless Crimper

EK 1201D
  • Faster, Lighter, Last Longer
  • New dieless 12 ton tool EK 120ID
  • Dies Indent Crimp (25-500mm² AWG4-1000mcm)
Model EK1201D
Crimp Force 120KN
Capacity CU/AL
25mm²-500mm²
Crimps Per Charge 40 crimps@150mm²
Crimps Cycle 12sec
Net Weight 6.7Kg with battery
Length 420mm
Supplled with 12V 3Ah Ni-Mh battery;
230vac one-hour fast charger

Klauke HK 12/2 ELHK 12/2 EL

Version with 3phase Version with 3phase Motor.

Rated Output: 0.55 kW
Motor Voltage: 360 V – 440 V / 50 Hz
Pump Capacity: 0.82 l/min.
Operating Pressure: 700 bar max.
Capacity: 700 bar max.

Version with 3phaseVersion with 3phase motor:

Rated Output: 0.75 kW
Motor Voltage: 230 V / 50 Hz
Pump Capacity: 0.9 l/min.
Capacity: 16 to 400mm²

Klauke HK 25/2 EL

HK 25/2 EL

25/2 EL with crimping head, 250 kN crimping force.

With 3- phase motor 400 V.

  • Total weight approx. 45.900 kg
  • Part No. HK 25/2 EL/380
  • Capacity. 120 to 1000mm²

With AC motor 230 V.

  • Total weight approx. 53.000 kg
  • Part No. HK 25/2 EL/220

Hydraulic Crimping Tools

Klauke HK 45 HK 45

Hydraulic crimping tool with foot pump including 2m high pressure hose and quick action hose coupling. For interchangeable dies, H-shape crimping head.

Crimping force: 450 kN
Operating pressure: max. 700 bar
Total weight: approx. 23.000 kg
Operating Pressure: 700 bar max.

Klauke HK 60/22 HK 60/22

For interchangeable dies, Flip top style closed crimping head, rotates 360°. Two stage hydraulics. Automatic retraction when crimp is complete. Manual retraction in case of need.

Crimping force: 60 kN
Stroke: 17 mm
Length: approx. 460 mm
Weight: approx. 3.300 kg
Ambient temperature: –20 °C up to +40 °C

Klauke HK 120/42 HK 120 / 42

Wide Crimping

For Interchangeable dies, C-shape crimping head rotates 320°. Two stage hydraulics, Automatic retraction when crimp is complete. Manual retraction in case of need.

Crimping force: approx. 130 kN
Stroke, Opening: 42 mm
Length: approx. 560 mm
Weight: approx. 5.900 kg
Ambient temperature: –20 °C up to +40 °C

Mechanical Crimping Tools

K 09

Klauke K 09 / K 09 SP (With Ratchet)

For Tubular lugs and Connectors "standard type", with revolving dies.
Range: 25 – 150 mm2
Length: approx. 650 mm
Weight: approx. 2.900 kg

Klauke K09D / K 09 D/SP (With Ratchet)

K 09

For compression cable lugs and compression joints DIN 46235 / DIN 46267, part 1. With revolving dies.
Range: 25 – 150 mm2
Length: approx. 650 mm
Weight: approx. 2.900 kg


Kluake K 22

K 22

For interchangeable dies. Head rotates 360°.
With telescope handles.
Length: approx. 560 mm
Infinitely variable to 860 mm
Weight: approx. 2.500 kg


Klauke K 507 K 507

Product Information
The K507 is a crimping tool for exchangeable die sets. According the regularly use crimping tools for exchangeable dies the K507 has the advantage that the dies can be exchanged very easy and quickly. The way the dies can be locked is identical to the Klauke Pro-series. Furthermore two additional die sets can be stored in the handles and can be changed without additional tools. All die sets of the Klauke K50-series fit to the new tool. The K507 follows up to the former K007 in improved quality and starts with the new ergonomic handle design.

Proffessional Roller Trolley Roller Trolley

Please Contact Us for more Information


Wire Stripper for Coaxial Cables Wire Stripper

  • Two- or three-level stripping of all common coaxial cables
    (e.g. antenna and transmission cables)
    of 4.8 to 7.5mm outer dia.
  • Also strips flexible cables such as 3x0.75 mm², 10 mm²
    and 16 mm²
  • Needs no adjustment of the cutting depth

Multi Stripper

Multi Stripper
  • Universal wire stripper for
  • Circular stripping
  • Longitudinal stripping
  • Stripping
  • Cutting

Wire Stripping Pliers (KL760180)Wire Stripping Pliers

  • For all common stranded and solid conductors of 0.2 to 6.0mm²
  • Adjustable length stop of 5 to 12mm
  • Built-in side cutter up to max. 2 mm dia.

Wire Stripping Pliers (KL765FR215)Wire Stripping Pliers

  • Automatic wire stripper for all common round and flat cables
  • A precise adjustment (5-fold) on various cable types and diameters is possible
  • Built-in side cutter up to max. 3mm dia.
  • Flat cable:Dismantle and stripping of conductors with PVC insulation of 0.75 - 4 mm²
  • Round cable:Dismantle and stripping of flexible cable 0.5 - 16 mm² (20-6 AWG),
    solid conductors: 0.5 - 10 mm² (20-8 AWG)

Cutting Tools

Battery Powered Hydraulic Crimping Tools (Click here for more details)

Hydraulic Operated (Click here for more details)

Mechanical Systems (Click here for more details)


Battery Powered hydraulic Crimping Tools

Klauke Mini ES 32 ES 32

  • Battery powered cable cutter for aluminium and copper cables
    (not for armoured cables)
  • Cutting head rotates 330º
  • Quick motor stop
  • Manual retraction in case of need
  • Ergonomic design for one hand operation
Cutting range: Ø 32mm stranded
e.g. 4 x 50 mm² NYY
Ø 14 mm fine stranded
e.g. H07V-R 1 x 50 mm²
Cutting time: 4 s
Stroke: 9 mm
Weight: 1.8 kg
Battery voltage: 9.6 V
Battery capacity: 1.3 Ah, approx. 60 cuts
(H07V-R 1 x 240 mm² NYY)
Crimps per charge: approx. 85 crimps (Cu tubular cable lugs
120 mm2, hexagonal crimping)
Charging time: 40 min. (15 min. with quick charger)
Ambient temperature: -20 °C up to +40 °C
Part No. ES32

Klauke ESG45PLUS ESG 45 Plus

  • Cuts steel armoured copper or aluminium cables and Al/St cables (ACSR).
  • Cutting head rotates 360°, jaws flip open
  • Two stage hydraulics
  • Quick motor stop
  • Electronic control and monitoring of cutting operation
  • Light diode for battery charge and maintenance control
Cutting force: 60 kN
Cutting range: Ø 45 mm, e.g. Al/St cable 570/40
Cutting time: 8 s up to 18 s (depending on cable size)
Weight: 5.8 kg
Battery voltage: 12 V
Battery capacity: 2.6 Ah, approx. 90 cuts (Al/St cable
570/40)
Charging time: 60 min. (15 min. with quick charger)
Ambient temperature: -20 °C up to +40 °C
Part No. ESG45PLUS
Mains operated tool, 230V NSG45

Klauke ESG85PLUS ESG 85

  • Cuts copper and aluminium cables (not for armoured cables)
  • Cutting head rotates 360°, jaws flip open
  • Two stage hydraulics
  • Quick motor stop
  • Electronic control and monitoring of cutting operation
  • Light diode for battery charge and maintenance controle
Cutting force: 60 kN
Cutting range: Ø 85 mm, e.g. 4 x 240 mm² NYY
Cutting time: 21 s up to 40 s (depending on cable size)
Weight: 7.3 kg
Battery voltage: 12 V
Battery capacity: 2.6 Ah, approx. 40 cuts (4 x 240 mm² NYY)
Charging time: 60 min. (15 min. with quick charger)
Ambient temperature: -20 °C up to +40 °C
Part No. ESG85PLUS
Mains operated tool, 230V NSG85

Hydraulic Operated

AS 105 FHP, AS 120 FHP (Hydraulic cutting heads with foot pump) AS 105 FHP

  • Cut armoured copper and aluminium cables (depending on cable type)
  • Special short and lightweight design of the cutting heads
  • Foot pump with two-stage hydraulic system

Characteristics

  • Cutting head with quick coupling, rotates 360°
  • High-pressure hose, 2m
  • Manual retraction in case of need, even at high pressure

FHP2 (Foot pump 700 bar) FHP 2

  • Two stage hydraulic system
  • Manual retraction in case of need, even at high pressure
  • Sturdy design

Characteristics

  • For the operation of hydraulic crimping and cutting heads
  • Automatic pressure switch off
  • High-pressure hose, 2m

Hydraullic Cable Cutters

Cuts steel armoured copper or aluminium cables and AI/steel cables (ACSR)

HSG 45 HSG 145

Cutting force: 60 kN
Max. capacity: Ø 45 mm
e. g. Al/steel cable 570/40
length: approx. 560 mm
Weight: approx. 4.900 kg

K 502

K 502

Hydraullic Cable Cutter with Foot pump

Specifications:

Cutting range: 50 mm Ø max.
Operating pressure: 700 bar max.
Weight: approx. 21.600 kg

K 202

K 202

Hydraulic Cable Cutter with foot pump.

Specifications:

Cutting range: 90 or 120 mm Ø max.
Operating pressure: 700 bar max.
Weight: approx. 29.500 kg

Mechanical Systems

K 106/1 K 106

With Ratchet Cuts cable in steps. One hand operation.

Cutting range: 32mm Ø max.
Length: approx. 250 mm
Weight: approx. 0.550 kg

K 106/2 K 106/2

With Ratchet Cuts cable in steps. One hand operation.

Cutting range: 52mm Ø max.
Length: approx. 280 mm
Weight: approx. 0.740 kg

K 103/1K 103

Mechanical hand cable cutter with ratchet. Cuts cables in steps.Two hand operation. Suitable for cutting earth, plastic and rubber cables. Not for cutting steel or steel wire.

Cutting range: 60 mm Ø max.
Length: approx. 720 mm
Weight: approx. 4.500 kg

K 104/1 K 104

Mechanical hand cable cutter with ratchet. Cuts cables in steps. Two hand operation. Suitable for cutting earth, plastic and rubber cables. Not for cutting steel or steel wire.

Cutting range: 100 mm Ø max.
Length: approx. 870 mm
Weight: approx. 5.700 kg

K 130 K 130

High performance because of specially designed flat blades.

Cutting range: 30 mm Ø max.
Length: approx. 570 mm
Weight: approx. 1.700 kg

K 150 K 150

High performance because of specially designed flat blades.

Cutting Range: 50 mm Ø max.
Length: approx. 710 mm
Weight: approx. 3.000 kg

K 230 K 230

Similar to K 130, but with insulated shock resistent handles in accordance with VDE 0682, part
201.

Length: approx. 570 mm
Weight: approx. 2.100 kg

K 250 K 250

Similar to K 150, but with insulated shock resistent handles in accordance with VDE 0682, part
201.

Length: approx. 710 mm
Weight: approx. 3.700 kg

Cable Cutter (Product Features)Cable Cutter

  • For NYM and NYY cable
  • Fully insulated
  • Suitable for Cu and aluminium cable
  • Opening up to 16 mm

Cable Cutter (Product Features)Cable Cutter

  • For NYM and NYY cable
  • Fully insulated
  • Suitable for Cu and aluminium cable
  • Opening up to 25 mm

Combination Pliers (Product Features) Combination Pliers

  • DIN ISO 5746
  • Induction hardened cutting edge
  • For hard and soft wire

Side Cutter (Product Features)

Side Cutter
  • DIN ISO 5746
  • Induction hardened cutting edge
  • For hard and soft wire

Side Cutter (Product features)

Side Cutter
  • With additional cable stripping holes for 1.5mm² and 2.5mm²